Integra DTM-5.3 Using Tape 2 Monitor, Monitoring during recording, Using a graphic equalizer

Using Tape 2 Monitor

Master Volume

Standby/On

1 ABC

2 DEF

3 GHI

4 JKL

5 MNO

6 PQR

7 STU

8 VWX

9 YZ-

Standby

Direct Tuning

0/10

/

Scan

Speakers

A

B

Clear

Zone 2

Off

Display

Direct

Tuning

Memory

FM Mode

Character

Phones

DVD

Video

Tape 2

Tape 1

FM

AM

Phono

CD

Bass

Treble

Balance

Monitor

L

R

DTM-5.3

Tape 2 Monitor

Unless the component connected to the TAPE 2 connectors is used, the T-2 MONITOR indicator in the main unit’s display should not

be lit; otherwise, the sound from other sources will not be heard. If a 3-head tape deck is connected to the TAPE 2 connectors, you can use the Tape 2 Monitor to monitor the recording.

Notes:

• Even when Tape 2 is not selected as the source (the T-2 MONITOR indicator is not lit), the source signal is still sent

to the TAPE 2 output.

•If you select a different input source while listening to the Tape 2 Monitor sound, the T-2 MONITOR indicator flashes for a few seconds. However, the audio signal does not change.

Tape 2

DTM-5.3

T-2 MONITOR

AMP.

T-2 MONITOR

Playback Recording Playback

Tape deck (TAPE 2) CD player, etc.

Monitoring during recording

You can monitor the source signal through the speakers or headphones when Tape 2 Monitor is turned off.

or Graphic Equalizer

Using a graphic equalizer

If the T-2 MONITOR indicator in the display is not lit, the sound from the source should be audible. If a 3-head tape deck connected to the TAPE 2 connectors is used for recording, press either the Tape 2 button on the remote controller or the Tape 2 Monitor but- ton on the main unit. “TAPE 2” will appear in the display for a few

seconds: the T-2 MONITOR indicator will light up and the sound you just recorded will be audible.

To return to listening to the source sound, press either the Tape 2 button on the remote controller or the Tape 2 Monitor button on the

main unit. The	T-2 MONITOR	indicator turns off.
			T-2 MONITOR
Tape 2	Remote controller
Monitor

1Connect the graphic equalizer to the TAPE 2 connectors on the rear panel of the DTM-5.3.

2If a second tape deck is used, connect it to the tape deck con- nectors on the graphic equalizer.

3Press the Tape 2 button on the remote controller or the Tape 2 Monitor button on the main unit.

The T-2 MONITOR indicator on the main unit’s display lights up.

4Follow the operating instructions for the graphic equalizer. To record an equalized signal, use the tape deck connected to the equalizer.

Tape 2	Remote controller
Monitor

T-2 MONITOR

or

or

26