
Enjoying music in the remote zone
On, Standby
Zone 2 indicator
|
|
| Preset |
|
|
| / |
|
|
| Master Volume |
Standby/On | 1 ABC | 2 DEF | 3 GHI |
| 4 JKL | 5 MNO | 6 PQR |
| 7 STU | 8 VWX | 9 YZ- |
Standby |
|
|
|
| Direct Tuning | 0/10 / | Scan |
Speakers |
|
|
|
|
|
|
|
|
|
|
|
|
| |
A | B |
|
|
|
|
|
|
|
| Clear |
|
|
|
|
| Zone 2 | Off | Display |
| Direct |
| Tuning |
| Memory | FM Mode | Character |
|
|
|
| Phones |
| DVD | Video | Tape 2 | Tape 1 | FM | AM | Phono | CD | Bass | Treble | Balance |
|
|
| Monitor |
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
| Zone 2 | ||
|
|
|
|
|
|
|
|
|
|
|
| L | R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Off |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Input selector |
Zone 2 Off | Input selector buttons |
Zone 2 operation from the main room
To select a source for the zone 2 room other than the source selected for the main room.
1Press the Zone 2 button, the Zone 2 indicator flashes.
2Select an input source within five seconds.
The Zone 2 indicator will light up.
Example: When the CD button is pressed.
AUTO
MONO
If you want to change the source for the zone 2 room to the same source that is selected for the main room, press the Zone 2 button again until “Z2 SRC” appears in the display.
To select the same source as that of the main room to zone 2 room.
1Press the Zone 2 button twice while the Zone 2 indicator is flashing (within 5 seconds).
Zone 2 (A-BUS or IR) operation in the zone 2 room
1Press the On button on the remote controller.
The power to the Zone 2 devices turned on.
2Select an input source.
Notes:
• If you select FM or AM, use the Preset /
buttons to select a preset channel.
•Pressing the Standby button will place the Zone 2 device in Standby mode.
The Zone 2 indicator will light up continuously.
AUTO
MONO
Notes:
•If you set a sleep time using the Sleep button, it will also func- tion for the zone 2 room.
•If the source for the main room is selected as the source for the zone 2 room, and the source for the main room is changed, then the source for the zone 2 room will change as well.
•If you select FM (or AM) using the input source buttons when the source for the zone 2 room is set to AM (or FM), the output for the zone 2 room also changes to AM (or FM).
•When you are using the zone 2 room, the system will not function.
•If you are not using the Zone 2 function, press the Off button to turn off the Zone 2 indicator.
•Even if the main room device is in Standby mode, you can adjust the zone 2 room device settings. In this case, the display turns off and the Zone 2 indicator flashes.
27