Intel 100BASE-T4 manual Checking the LEDs

C H A P T E R 3 Intel Express 100BASE-T4 Stackable Hub

You can connect the following 100 Mbps devices to the ports on the Express Stackable Hub and optional uplink modules:

•Workstations

•Servers

•Printers

•Transceivers

•Switching hubs

•Routers

•Printers

•Print servers

See “Using a switch to connect hubs” later in this chapter for information about connecting to 100 Mbps switching hubs. For information about making connections to other 100BASE-T4 devices, refer to the documentation that shipped with the device.

Checking the LEDs

When you connect the power cord to the Express 100BASE-T4 Stackable Hub, the hub performs a confidence test. During this test, the hub’s Stat LED lights amber to indicate the test is in progress.

When the confidence test successfully completes, the LEDs on the hub’s front panel should appear as follows:

•The Pwr LED lights green, indicating the hub is receiving power.

•The Stat LED lights green, indicating the hub passed the confidence test and is operating normally.

16