Intel 100BASE-T4 manual Quick Start, Install the hubs, Connect the stack, Connect the devices

Quick Start

1 Install the hub(s).

Maximum stack: Six hubs

Rack requirements: Standard 19-in (48.26 cm), 1.5 EIA rack-mount space for each hub

Shelf requirements: Support for 10 lbs (4.5 kg) per hub

12.3 lbs (5.6 kg) with uplink module and NMM

2 Connect the stack.

Use the cascade cables to connect multiple hubs. You need to purchase cascade cables separately from your network services supplier (see Appendix B for more information).

Do not use UTP cabling to connect hubs.

3 Connect the devices.

Connect 100BASE-T4 devices to the hub using four-pair Category 3, 4, or 5 unshielded twisted pair (UTP) cabling. Maximum cable distance between a port and an attached device is 100 meters.

4Plug power cords into each hub, then check LEDs.

•Make sure the Pwr LED is lit for all hubs.

•Make sure the numbered port LEDs are lit for connected devices.

Pwr LED

Port LEDs

1