Intel 200 2.4.3 Summary

Processor Thermal/Mechanical Information

Thermal and Mechanical Design Guidelines 25

Figure 9. Case Study #4: A “Top Mount Fan” PSU is located next to Processor in μATX

Chassis for System Thermal Performance Improvement

2.4.3 Summary

In summary, heatsink design considerations for the Intel Celeron processor 200

sequence on the Intel Desktop Board D201GLY2 include:

• The heatsink temperature TS-TOP-MAX which is a function of system thermal

performance must be compliant in order to ensure processor reliability.

• Heatsink interface to die surface characteristics, including flatness and roughness.

• The performance of the thermal interface material used between the heatsink and

the die.

• The required heatsink clip static load, 9.9 lbf ± 1.2 lbf, throughout the life of the

product (refer to Section 2.1.2.2 for further information).

• Surface area of the heatsink.

• Heatsink material and technology.

• Volume of airflow over the heatsink surface area.

• Development of airflow entering and within the heatsink area.

• Physical volumetric constraints placed by the system.

§

Contents

Main Intel Celeron Processor 200 Sequence Page Contents Figures Tables Revision History 1 Introduction 1.1 Document Goals and Scope 1.1.1 Importance of Thermal Management 1.1.2 Document Goals 1.1.3 Document Scope 1.2 Reference Documents .com/design/processo r/datashts/318546.ht m http://www.formfacto rs.org/ 1.3 Definition of Terms 2 Processor Thermal/Mechanical Information 2.1 Mechanical Requirements 2.1.1 Processor Package Table 1. Micro-FCBGA Package Mechanical Specifications Page Page Page 2.1.2 Heatsink Attach 2.1.2.1 General Guidelines 2.1.2.2 Heatsink Clip Load Requirement 2.1.2.3 Heatsink Attach Mechanism Design Considerations 2.2 Thermal Requirements 2.2.1 Processor Junction Temperature 2.3 Heatsink Design Considerations 2.3.1 Heatsink Size 2.3.2 Heatsink Mass 2.3.3 Thermal Interface Material 2.4 System Thermal Solution Considerations 2.4.1 Chassis Thermal Design Capabilities Equation 1 TS-SYSTEM = TA + (TS-TOP TA) 16/PCPU TS-TOP-MAX = 91C 2.4.2 Improving Chassis Thermal Performance Page Page 2.4.3 Summary Page 3 Thermal Metrology 3.1 Characterizing Cooling Performance Requirements Equation 2 JA = (TJ TA) / PD Equation 3 JA = JS + HS_BASE + S-TOP-A Equation 4 (JA JS HS_BASE) PD + TA = TS-TOP-MAX 3.1.1 Example JA = (TJ TA) / TDP = (90 55) / 20 = 1.75 C/W SA = JA JS = 1.75 0.50 = 1.25 C/W TS-TOP-MAX = (jA jS HS_BASE) PD + TA = (1.25 0.30) 20 + 55 = 74 C 3.2 Local Ambient Temperature Measurement Guidelines Page 3.3 Processor Power Measurement Metrology Recommendation 3.3.1 Sample Preparation Equation 5 PD = VCC (Vi / RSENSE) Page Page Page 4 System Thermal/Mechanical Design Information 4.1 Overview of the Reference Design 4.1.1 Altitude 4.1.2 Heatsink Thermal Validation 4.2 Environmental Reliability Testing 4.2.1 Structural Reliability Testing 4.2.1.1 Random Vibration Test Procedure 3.13GRMS (10 minutes per axis) 4.2.1.2 Shock Test Procedure 4.2.1.2.1 Recommended Test Sequence 4.2.1.2.2 Post-Test Pass Criteria 4.2.2 Power Cycling 4.2.3 Recommended BIOS/CPU/Memory Test Procedures 4.3 Material and Recycling Requirements 4.4 Safety Requirements 4.5 Reference Attach Mechanism 4.5.1 Structural Design Strategy 4.5.2 Mechanical Interface to the Reference Attach Mechanism Page Appendix A Heatsink Clip Load Metrology A.1 Overview A.2 Test Preparation A.2.1 Heatsink Preparation A.2.2 Typical Test Equipment Table 5. Typical Test Equipment A.3 Test Procedure Examples Page Appendix B Intel Enabled Boxed Processor Thermal Solution Information Page Appendix C Mechanical Drawings