Hardware Specifications and Features

Hardware Specifications and Features

3

This chapter covers all the hardware specifications associated with the IIR controller and its components. Section 3.5 covers optional RAID features that are supported by the RAID Software Suite. The accompanying Software Guide covers all implemented software features.

3.1IIR Controller Hardware Features

This section provides a summary of the key features, configuration options and support interface technology supported by the IIR controller.

Table 3-1. Hardware Architecture Features

Component

Feature

 

 

I/O Microprocessor

The 80303 processor: 100MHz, RISC 64-bit core

 

 

 

The 80303 IOP supports up to 512 Mbytes of 64-bit 100

 

MHz ECC SDRAM operating at 66 MHz. It is backward

Cache Memory

compatible to support 64, 128, and 256 Mbit SDRAM

 

technologies. Note: The SRCMRU is limited to 32MB of

 

embedded memory.

 

 

Flash Memory

3.3v, 16Mbit (2 MB) flash memory chip is used to store

the RAID firmware

 

 

 

I/O interface (PCI)

RAIDIOS-enabled PCI 2.2 compliant

 

 

PCI Transfer Rate

528MB/second (burst)

 

 

PCI Signaling

Capable of being used in a 5 volt or 3.3 volt slot.

 

 

Table 3-2. Electrical Specifications

Attribute

Measurements

 

 

Voltage Requirements

+5, 3.3 Volts (all +/– 5% tolerance)

 

 

Power Consumption

+5V @ 0.25 Amps = 1.25W

+3.3V @ 2.5 Amps = 8.25W

 

 

 

Hardware Installation and User’s Guide

17

Page 17
Image 17
Intel 273561-003 manual IIR Controller Hardware Features, Hardware Architecture Features, Electrical Specifications