Intel 510T manual After a Switch or Stack is Contacted

C H A P T E R 2 Intel Device View

	After a Switch or Stack is Contacted
Commands	When Intel Device View contacts a switch, the basic commands are
	supplemented with:
	• Local Management access — provides Telnet access to monitor-
	ing functions embedded in the switch.
	• RMON facility — gathers information about the network traffic,
	monitors traffic on subnets and enables you to define alarms on
	the individual ports.
	• Stack Synchronization Manager (for stacks only) — enables you
	to establish a stack from a group of switches connected via a
	Matrix Module, or add a switch to an existing stack and then syn-
	chronize their configurations.
	• Switch Position Organizer (for stacks only) — enables you to
	move the switches displayed on screen around in the stack.
	• Color Code Matrix Ports (for stacks only) — colors the individ-
	ual ports on the Matrix Module. This simplifies the task of trac-
	ing cables, as the ports on the Stack Interface Modules become
	the same color as the corresponding Matrix Module port.
	• A color coding chart for Intel Device View to show the states of
	switch’s LEDs

23