Intel 510T manual Link Aggregation, Tween two switches or stacks. You can

C H A P T E R 3 Standard Configuration

Link Aggregation

Purpose	Combines two or four adjacent ports to increase the bandwidth be-
	tween two switches or stacks. You can:
	•	Add a new entry to the list
	•	Delete an entry

Adding an Aggregate Link To set up and add an aggregate link:

1Select Device Setup or Stack Setup.

2Click Link Aggregation.

3Click Add.

4For a stack, click Switch and select one from the list.

5Click Aggregation width: and select 2 Ports or 4 Ports.

6Click Anchor Port and select a port.

7Type a unique name for the link.

8Click OK. For further configuration of a link, for example in a VLAN, use the Anchor Port.

49