Intel AX965Q user manual Set Supervisor/User Password, Please Confirm Your Password, User’s Manual

User’s Manual

2.2.10Set Supervisor/User Password

You can set either supervisor or user password, or both of them. Supervisor Password: able to enter/change the options of setup menus.

Follow these steps to change the password.

zChoose the “Set Supervisor/User Password” option from the “Initial Setup Screen” menu and press <Enter>. The screen displays the following message:

zPlease Enter Your Password

zPress <Enter>.

zIf the CMOS is good and this option has been used to change the default password, the user is asked for the password stored in the CMOS. The screen displays the following message:

Please Confirm Your Password

zType the current password and press <Enter>.

zAfter pressing <Enter> (ROM password) or the current password (user-defined), you can change the password stored in the CMOS. The password must be no longer than eight (8) characters. Remember, to enable the password setting feature, you must first select either “Setup” or “System” from the “Advanced BIOS Features” menu.

ATX Main board 79