Intel cc3300, cc2300 manual Installing Linux DMI Service Provider

Intel Server Control Installation Guide

ISC Installation Procedure for Linux Red Hat 7.1 and Red Hat Enterprise Linux AS 2.1

There are three steps to the Linux Red Hat installation process:

•Installing Linux DMI server provider

•Installing ISC

•Configuring the SNMP_DMI mapper

Installing Linux DMI Service Provider

1.Insert the HP Server cc3300 & cc2300 User Information, Diagnostics & Utilities Resource CD into the Linux server CD ROM drive.

2.Mount the CD using either of the following methods:

•Enter the mount command as follows: mount /mnt/cdrom

•Use the Disk Management utility. To invoke this utility click the Start button, select System, and then select the Disk Management menu option.

NOTE

If you prefer a quicker method for installing ISC on RedHat 7.1, look for the installation script that is included in the “driver” tab of the cc2300/cc3300 Resource CD.

3.Uninstall the ucd-snmp version 4.2 software package if it has been installed previously with rpm –e. ucd-snmp version 4.2 software is included with RedHat 7.1. ISC runs with ucd-snmp version 4.1.

Check for ucd-snmp version 4.2 using the RPM (RedHat Package Manager) query command. Rpm –q ucd-snmp

Output should be: Ucd-snmp-4.2-12 Type in:

Rpm –e ucd-snmp

A message should state ucd-snmp-utils and ucd-snmp-devel are dependent upon ucd-snmp. Remove ucd-snmp-utils, ucd-snmp-devel and then ucd-snmp using the following commands. Rpm –e ucd-snmp-utils

Rpm –e ucd-snmp-devel Rpm –e ucd-snmp

14