Intel Desktop Board D845PESV Product Guide

Setting the BIOS Configuration Jumper Block

CAUTION

Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation.

The location of the desktop board’s BIOS configuration jumper is shown in Figure 12.

3

1

OM14693

Figure 12. Location of the BIOS Configuration Jumper Block

The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 7 shows the jumper settings for the Setup program modes.

Table 7. Jumper Settings for the BIOS Setup Program Modes (J9H2)

Jumper Setting

3

1

3

1

Mode

Normal (default) (1-2)

Configure (2-3)

Description

The BIOS uses the current configuration and passwords for booting.

After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to clear passwords.

3 1

Recovery (None)

The BIOS recovers data from a recovery diskette in the event of a failed BIOS update.

34

Page 34
Image 34
Intel D845PESV manual Setting the Bios Configuration Jumper Block, Jumper Settings for the Bios Setup Program Modes J9H2