Intel Desktop Board D845PESV Product Guide
62
Boot Device Priority Submenu Maintenance Main Advanced Security Power Boot Exit
Boot Device Priority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
The submenu represented in Table 27 is for setting boot devices priority.
Table 27. Boot Device Priority Submenu
Feature Options Description
1st Boot Device
2nd Boot Device
3rd Boot Device
• Removable Device
• Hard Drive
• ATAPI CD-ROM
• Disabled
Specifies the boot sequence from the available devices. To specify
boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the intended boot device.
The operating system assigns a drive letter to each boot device in
the order listed. Changing the order of the devices changes the
drive lettering. The default settings for the first through final boot
devices are, respectively listed below. The BIOS supports up to
sixteen total boot devices in any combination of the boot device
types below, with respect to these maximums per type.
• Removable Device (maximum of four).
• Hard Drive (maximum of 12).
• ATAPI CD-ROM (maximum of four).
Hard Disk Drives Submenu Maintenance Main Advanced Security Power Boot Exit
Boot Device Pri ority
Hard Disk Drives
Removable Devices
ATAPI CD-ROM Drives
The submenu shown in Table 28 is for setting hard disk drives.
Table 28. Hard Disk Drives Submenu
Feature Options Description
1st Hard Disk Drive
(Note) Dependent on installed
hard drives Specifies the boot sequence from the available hard disk
drives. To specify boot sequence:
1. Select the boot device with <↑> or <↓>.
2. Press <Enter> to set the selection as the intended
boot device.
Note: This boot device submenu appears only if at least one boot device of this t ype is installed. This list will
display up to twelve hard disk drives, the maximum number of hard disk drives s upported by the BIOS.