Intel Desktop Board DQ35MP Product Guide
NOTE
Memory must be installed in the Channel A, DIMM 0 socket to enable Intel Quiet System Technology.
To install a DIMM, follow these steps:
1.Observe the precautions in "Before You Begin" on page 31.
2.Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord.
3.Remove the computer’s cover and locate the DIMM sockets (see Figure 18).
Figure 18. Installing a DIMM
4.Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position.
5.Holding the DIMM by the edges, remove it from its
6.Position the DIMM above the socket. Align the small notch at the bottom edge of the DIMM with the keys in the socket (see inset in Figure 18).
44
