Delete an Array
The Delete Array menu option allows for deletion of disk array assignments.
Deleting an existing disk array could result in loss of data. Record all array information including the array type, the disk members, and stripe block size in
case you wish to undo a deletion.
FastBuild (tm) Utility 2.03 (c)
| [ | Delete Array Menu] ] |
| |
Logical Disk No | RAID Mode | Total Drv | Capacity (MB) | Status |
Logical Disk1 | Stripe | 2 | 240068 | Functional |
Logical Disk2 | ||||
Logical Disk3 | ||||
Logical Disk4 | ||||
|
| [ | Keys Available] ] |
[ ] Up | [ ] Down | [ESC] Exit | [Del] Delete |
1. To delete an array, highlight the array you wish to delete and press the <Del> key.
2. The View Array Definition Menu will appear (as shown below) showing which drives are assigned to this array. Press <Ctrl>+<Y> if you are sure to delete the array or other keys to abort.
FastBuild (tm) Utility 2.03 (c)
| [ View Array Definition Menu] |
| ||
Logical Disk No | RAID Mode | Total Drv | Capacity (MB) | Status |
Logical Disk 1 | Stripe | 2 | 240068 | Functional |
Stripe Block: 64KB |
|
| Gigabyte Rounding: OFF | |
| [ | Drives Assignments] ] |
Channel:ID | Drive Model | Capacity (MB) |
1:SATA | ST3120026AS | 120034 |
2:SATA | ST3120026AS | 120034 |
Are you sure you want to delete this array?
Press
3. Press <Y> to confirm yes to the following warning message and continue array deletion.
Do you want to clear boot sector that will delete any existing data on your hard disks? Y - Clear boot sector / N - Delete only
4. At th next prompt, press <Ctrl>+<Y> to remove the boot sector or any keys to abort. When the array
is deleted, the screen will return to Delete Array Menu. Press <Esc>to return to Main Menu.
English
- 85 - | Appendix |
