IDE Secndry Slave RAID
Enabled | Enable 2nd slave channel IDE RAID function. |
Disabled | Disable this function. (Default value) |
SATAII 1 Primary RAID
Enabled | Enable SATAII 1 1st SATA RAID function.(Default value) |
Disabled | Disable this function. |
SATAII 1 Secondary RAID
Enabled | Enable SATAII 1 2nd SATA RAID function.(Default value) |
Disabled | Disable this function. |
SATAII 2 Primary RAID
Enabled | Enable SATAII 2 1st SATA RAID function.(Default value) |
Disabled | Disable this function. |
SATAII 2 Secondary RAID
Enabled | Enable SATAII 2 2nd SATA RAID function.(Default value) |
Disabled | Disable this function. |
On-Chip IDE Channel0
Enabled | Enable onboard 1st channel IDE port. (Default value) |
Disabled | Disable onboard 1st channel IDE port. |
On-Chip IDE Channel1
Enabled | Enable onboard 2nd channel IDE port. (Default value) |
Disabled | Disable onboard 2nd channel IDE port. |
IDE1 Conductor Cable
Auto BIOS autodetects IDE1 conductor cable .(Default Value)
ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your IDE
| device and cable are compatible with ATA66/100/133). |
ATA33 | Set IDE1 Conductor Cable to ATA33. (Please make sure your IDE device |
| and cable are compatible with ATA33) |
IDE2 Conductor Cable
Auto BIOS autodetects IDE2 conductor cable. (Default Value)
ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133. (Please make sure your IDE
| device and cable are compatible with ATA66/100/133) |
ATA33 | Set IDE2 Conductor Cable to ATA33. (Please make sure your IDE device |
| and cable are compatible with ATA33) |
Serial-ATAII 1 (Onboard nVIDIA chipset)
Enabled | Enable |
Disabled | Disable |
| (Onboard nVIDIA chipset) |
|
Enabled | Enable |
|
Disabled | Disable |
|
|
|
|
V1.1+V2.0 | Enable USB 1.1 and USB 2.0 controllers. (Default Value) |
|
V1.1 | Enable only USB 1.1 controller |
|
Disabled | Disable onchip USB support. |
|
|
|
|
| - 43 - | BIOS Setup |
