IM-Q35 Mainboard
Fan Power Connectors: CPUFAN1, SYSFAN1
The fan power connectors support system cooling fan with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset onboard, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control.
GND | SENSOR |
|
+12V | +12V |
|
SENSOR |
| |
CONTROL | GND |
|
|
|
CPUFAN1SYSFAN1
Important
Please refer to the recommended CPU fans at Intel® official website or consult the vendors for proper CPU cooling fan.
Front Panel Connector: JFP1
The mainboard provides one front panel connector for electrical connection to the front panel switches and LEDs. The JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide.
JFP1
| 10 |
| 9 |
| ||
| Power + |
|
|
| +Reset | |
| Switch - |
|
|
| - Switch | |
| Power |
|
|
| - HDD | |
| LED | 2 | 1 +LED | |||
|
| |||||
| JFP1 Pin Definition | |||||
|
|
|
|
|
|
|
PIN | SIGNAL |
|
| PIN |
| SIGNAL |
1 | HDDLED+ |
|
| 2 |
| PWRLED+/PWRLED+ |
3 | HDDLED- |
|
| 4 |
| |
5 | RESET- |
|
| 6 |
| PWRBTN- |
7 | RESET+ |
|
| 8 |
| PWRBTN+ |
9 | N/A |
|
| 10 |
| Key(no pin) |
|
|
|
|
|
|
|
