Intel IM-Q35 Series manual Super IO Configuration Serial Port 1 / 2 Address, Serial Port2 Mode

	BIOS Setup
	specifications of your drive must match with
	the drive table. The hard disk will not work
	properly if you enter improper information for
	this category. If your hard disk drive type is
	not matched or listed, you can use [Manual] to
	define your own drive type manually.
[LBA/Large Mode]	Enabling LBA causes Logical Block Ad-
	dressing to be used in place of Cylinders,
	Heads and Sectors
[Block(Multi-Sector Transfer)]	Any selection except Disabled determines
	the number of sectors transferred per block
[PIO Mode]	Indicates the type of PIO (Programmed Input/
	Output)
[DMA Mode]	Indicates the type of Ultra DMA
[S.M.A.R.T.]	This allows you to activate the S.M.A.R.T.
	(Self-Monitoring Analysis & Reporting
	Technology) capability for the hard disks. S.
	M.A.R.T is a utility that monitors your disk sta
	tus to predict hard disk failure. This gives you
	an opportunity to move data from a hard disk
	that is going to fail to a safe place before the
	hard disk becomes offline.
[32 Bit Data Transfer]	Enables 32-bit communication between
	CPU and IDE card
Super IO Configuration

Serial Port 1 / 2 Address

Select an address and a corresponding interrupt for the serial port 1/2.

Serial Port2 Mode

This item allows you to select mode for Serial Port2.

Watch Dog

This feature is used to enable/disable the Watch Dog feature.

Chassis Intrusion

The field enables or disables the feature of recording the chassis intrusion status and issuing a warning message if the chassis is once opened. To clear

3-9