Intel PMB-531LF user manual CPU Feature, Delay Prior to Thermal, Execute Disable Bit

Chapter 4 Award BIOS Setup

CPU FEATURE:

The options for these items are found in its sub menu. By pressing the <ENTER> key, you are prompt to enter the sub menu of the detailed options as shown below:

Phoenix – Award CMOS Setup Utility

CPU Feature

Delay Prior to Thermal	[16 Min]	Item Help
Thermal Management	[Thermal Monitor 1]
X TM2 Bus Ratio	12X
X TM2 Bus VID	1.404V	Menu Level ►
C1E Function	[Auto]
Execute Disable Bit	[Enabled]
↑↓→←:Move Enter: Select	+/-/PU/PD:Value F10:Save ESC:Exit	F1:General Help
F5: Previous Values	F6:Fail-Safe Defaults F7:Optimized Defaults

Descriptions on each item above are as follows:

1.Delay Prior to Thermal

The Delay Prior To Thermal BIOS feature controls the activation of the Thermal Monitor's automatic mode. It allows you to determine when the Pentium-M’s Thermal Monitor should be activated in automatic mode after the system boots.

2.Thermal Management The used Thermal Monitor

3.C1E Function

This is enabled to reduce power during idle operation

4.Execute Disable Bit

To select enable or disable the No-Execution Page Protection

Technology.

PMB-531LF USER′S MANUAL Page: 4-9