✏NOTE
See Chapter 4, “Using the Storage Console” in the user’s manual for instructions on customizing your RAID volumes using Storage Console.
Setup and Installation for UnixWare 7.1 or 7.1.1Software Requirements
•SRCU31
•SRCU31 UnixWare† Installation Disk (HBA diskette) (one blank high density floppy diskette required)
•SCO UnixWare 7.1 or 7.1.1 software with Netscape 4.08 or greater** Not supplied
Installing UnixWare on a RAID VolumeFollow the required procedure below to install Intel Integrated RAID.✏NOTE
When installing UnixWare, create only one RAID volume on which the operating system is to be installed.
1Create a SRCU31 UnixWare installation disk (HBA diskette): Insert the Intel Integrated RAID
CAUTION
Insert the SRCU31 UnixWare installation disk 1 (of 2 disks) and reboot. Install the OS using the install instruction provided in UnixWare 7 Installation Guide manual. UnixWare will prompt you to install Host Bus Adapter diskette. At that time insert the UnixWare Installation diskette created in Step 1.
2Use only the version of the SRCU31 UnixWare installation disk (HBA disk) that is provided on the CD or available from the Intel Web site for installation of this adapter. Do not use a HBA disk available from the vendor to install this product.
Intel Server RAID Controller | 15 |
Quick Start Guide |
|