Setup and Installation for Microsoft Windows† 2000 Server and Windows NT† 4.0 Server
✏NOTE
This guide details the steps necessary to setup the SRCU31 for local RAID administration. If you wish to setup remote administration for the SRCU31, refer to Chapter 2, “Advanced Installation Steps” in the SRCU31 User’s Manual.
Software RequirementsSoftware Requirements for Microsoft Windows 2000 Server•SRCU31•SRCU31 Windows 2000 Installation Driver Diskette (Microsoft Windows 2000 SCSI Miniport Diskette) (one blank high density floppy diskette required)
•Microsoft Internet Explorer 5.0 or greater* (included with Windows 2000)*Not supplied
Software Requirements for Microsoft Windows NT 4.0 Server•SRCU31
•Hard Disk Space (for RAID Software Suite): 9 MB Minimum
•SRCU31 Windows NT Installation Diskette (Microsoft Windows NT SCSI Miniport Diskette) (one blank high density floppy diskette required)
•Microsoft Windows NT Server 4.0*•Microsoft Windows NT 4.0 Service Pack 4 or greater*•Microsoft Internet Explorer 4.00 or greater**Not supplied
Installing Microsoft Windows 2000 Server or Windows NT 4.0 Server on a Intel Integrated RAID Volume
1Create a SRCU31 Microsoft Windows 2000 or Windows NT Installation Driver (temporary) Diskette
a.Insert the Intel Integrated RAID
c.When the Select a diskette to create screen appears, select Windows NT Installation for Windows NT 4.0 or Windows 2000 Installation for Windows 2000. A command window appears.
d.Insert a blank
Intel Server RAID Controller | 9 |
Quick Start Guide |
|