8Select Product Options, then Install product not listed. It will tell you that it is going to scan the A: drive for installation scripts. Ensure the SRCU31 NetWare Installation diskette is in the floppy drive, press Enter to continue.
9A screen prompt will ask which components (see below) you wish to install. Select the following components and press F10 to continue.
BKSTROSM.HAMHTTP and Winsock ServicesRAID Management AgentsThe appropriate files are copied and the AUTOEXEC.NCF and STARTUP.NCF files are modified as necessary.
CAUTION
Once the product is installed, check for and remove any duplicate lines in STARTUP.NCF. For example, NetWare 4.2 installations may insert an extra load line for the module PK411.NLM. Remove the extra line.
10After the installation is complete, reboot the server.11Load Support Pack 8a and reboot.12See Chapter 4, “Using the Storage Console” in the user’s manual for instructions on customizing your RAID volumes using Storage Console.
NetWare 5.0 or 5.1✏NOTE
If you do not use the boot capability of the NetWare 5.0 or 5.1
1Create a SRCU31 NetWare Installation Diskette.
a.Insert the Intel Integrated RAID
b.When the
c.When the Select a diskette to create screen appears, select NetWare Installation. A command window appears.
d.Insert a blank
3After booting, accept the license agreement. Then select Create a New Boot Partition.
4When NetWare boots again, it will first format the newly created boot partition, and then begin loading files. During this initialization, you will see a white graphical NetWare logo screen.
Intel Server RAID Controller | 13 |
Quick Start Guide |
|