Software Requirements
•SRCU31
•Hard disk space: minimum 4 MB
•
•SRCU31 NetWare Installation Diskette (one blank high density floppy diskette required)
•Novell NetWare† 4.2 with Service Pack 8a or higher or Novell NetWare 5.0 or 5.1 with Service Pack 4 or higher*
* Not supplied
Installing Novell NetWare on a RAID VolumeThere are two procedures listed below (one for each supported version of NetWare). Please follow the instructions for the version you wish to install (version 4.2 or 5.0 and 5.1).
NetWare 4.21Create a SRCU31 NetWare Installation Diskette.
a.Insert the Intel Integrated RAID
b.When the
c.When the Select a diskette to create screen appears, select NetWare Installation. A command window appears.
d.Insert a blank
2Insert the NetWare Installation
3When the device driver installation screen appears, Select additional or modify selected Disk / LAN drivers.
4Choose Select an additional driver. Select Insert to install an unlisted driver. Ensure that the SRCU31 NetWare Installation diskette (created in Step 1) is in the floppy drive and press Enter. Select BKSTROSM.HAM from the list.
5Continue with the NetWare installation as normal by following the screen prompts.
6Once the server installation is finished, complete the installation of the Intel Integrated RAID software suite by following the steps below.
7Run LOAD INSTALL.
12 | Intel Server RAID Controller |
| Quick Start Guide |