Intel SYS7180VE Introduction, 1.1Specification, 1.2Check List, 1.3Description, Power Consumption

CHAPTER 1 – Introduction

Chapter 1 Introduction

1.1Specification

Processor	Support Intel® PentiumTM 4 CPU up to 3.06 GHz
	Support Intel® CeleronTM CPU up to 2.60 GHz
	Support Intel® Celeron®DTM CPU up to 2.80 GHz (Prescott core)
Chipset	Intel®82845GV chipset supports 400/533MHz FSB
Memory	Two 184-pin DDR DIMMs socket, up to 2GB of 266/333MHz
	DDR SDRAM
BIOS	Award 4Mbit PnP flash BIOS
VGA	Integrated in 845GV, AGP4X
	Share memory up to 64MB with system main-memory
LAN	LAN1: Intel® 82562ET Ethernet controller, supports 10/100M
	Base-T
	LAN2: (optional)Intel®82540EM Ethernet controller, supports
	10/100/1000 Base-T
	Wake On LAN support
USB	Four USB ports, Hi-speed USB 2.0
Super I/O	Mini-DIN: 1x PS/2 keyboard/mouse connector
	RJ-45: 10/100/1000Mb Ethernet connector
	Female DB-15: VGA connector
	Box-header: 2* Serial port (2x5Pin);
		1*FDD (2x17Pin); 2* EIDE (2x20Pin);
	Pin-header: 1*Parallel port (2x13Pin)
Watchdog	System reset or non- maskable interrupt software programmable
	time I interval and jumper selectable (64-level)
Operating temperature		0 C ~60 C
Relative humidity		10%~90% non-condensing at temperature of 40BC or
		104BF

1.2Check List

Please check that your package is complete and contains the items below. If you discover damaged or missing items, please contact your dealer.

SYS7180VE CPU card Utility CD for SYS7180VE Installation Guide

IDE cable *2 FDD cable *1

SYS7180VE User’s Manual 1

CHAPTER 1 – Introduction

PS/2 1 to 2 adapter *1

Com extension cables with bracket *1

Com, Printer extension cables with bracket *1 +12V power cable *1

USB cable *1 Special for SYS7180VE Jumper Short Pin: 6 pcs

1.3Description

The SYS7180VE is a motherboard based on Intel 845GV chipset and is fully designed for PC environment. It features socket 478 compatible with Intel’s processor. This card accommodates up to 2GB of DDR memory.

The SYS7180VE comes with on board CPU temperature sensor to protect your processor from overheating (Winbond W83627HF chipset). Wired for Management (WFM) 2.0 specification compliance.

The SYS7180VE has a LAN connector that uses Intel ICH4 integrated with Intel 82562ET (AOL & 10/100) controller.

1.4Power Requirements

Your system requires a clean, steady power source for reliable performance of the high frequency CPU on the SYS7180VE Industrial CPU card, the quality of the power supply is even more important. For the best performance makes sure your power supply provides a range of 4.75 volts minimum to 5.25 volts maximum DC power source.

Power Consumption

For typical configurations, the CPU card is designed to operate with at least a 200W power supply. A higher-wattage power supply should be used for heavily-loaded configurations. The power supply must meet the following requirements:

Rise time for power supply: 2 ms to 20 ms

Minimum delay for reset to Power Good: 100 ms

Minimum Power down warning: 1 ms

2 SYS7180VE User’s Manual