TFX12V Power Supply Design Guide
Thin Form Factor with 12 V Connector
Version 2.0
3.4 Chassis Requirements
To ensure the power supply can be easily integrated, the following features should be designed into a chassis intended to use a TFX12V power supply:
•Chassis cutout (normally in the rear panel of the chassis) as shown in Figure 12.
•EITHER a mounting bracket to interface with the forward mounting hole on the power supply OR a mounting tab as shown in Figure 13 to interface with the mounting slot on the bottom of the power supply
Figure 12. Suggested TFX12V Chassis Cutout
Figure 13. Suggested Mounting Tab (chassis feature)
30
