English
19
3.4. Integrated Peripherals
ΓΈThis menu allows you to control the various ports of the computer such as IDE,
SATA, USB, IEEE1394, COM port, LPT port, AC97 audio, etc.

nOn-Chip Primary PCI IDE

Allows the user to enable or disable the first onboard IDE channel.
(default:Enabled)

nOn-Chip Secondary PCI IDE

Allows the user to enable or disable the second onboard IDE channel.
(default:Enabled)

nNo-Execute Memory Protect (Note)

Allows user to enable the No-Execute Memory Protect function. (default: Disabled)

nCPU Enhanced Halt (C1E) (Note)

Allows user to enable the CPU Enhanced Halt (C1E) function. (default: Disabled)

nCPU Thermal Monitor 2(TM2) (Note)

Allows user to enable the CPU Thermal Monitor 2(TM2) function. (default: Disabled)

nInit Display First

Allows you to select whether to boot the system using the AGP graphics card or the PCI
graphics card.
Options: AGU (boot using AGU graphics card)
Onboard (boot using onboard AGP)
PCI(boot using PCI graphics card). (default: AGU)

nOn-Chip Frame Buffer Size

Allows user to set the size of the on-chip frame buffer.
Options: 1MB/4MB/8MB/16MB/32MB (default:16MB)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Integrated Peripherals
On-Chip Primary PCI IDE[Enabled]
On-Chip Secondary PCI IDE[Enabled]
On-Chip SATA[Auto]
xSATA Port0 Configure asSATA Port0
xSATA Port1 Configure asSATA Port1
USB Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support[Disabled]
USB Mouse Support[Disabled]
AC97 Audio[Auto]
Onboard H/W LAN [Enabled]
POWER ON Function [Disabled]
Onboard Serial Port 1[3F8/IRQ4]
Onboard Parallel Port[378/IRQ7]
Parallel Port Mode[PRINTER]
xECP Mode Use DMA3
higf: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: Exit F1: General Help
F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults
Item Help
Menu Level}
If a hard disk
controller card is
used, set at Disabled
[Enabled]
Enable onboard IDE
PORT
[Disabled]
Disable onboard IDE
PORT
(Note) If the installed CPU supports this function, the system will automatically provide this
option.