22
English
3.6. PnP/PCI Configuration
ΓΈThis menu allows you to configure your PCI slots. You can assign IRQ's for various PCI
slots.

nPCI 1 IRQ Assignment

Allows you to assign an IRQ for the first PCI slot. Options: Auto,3,4,5,7,9,10,11,12,14,
15 (default:Auto)

nPCI 2 IRQ Assignment

Allows you to assign an IRQ for the second PCI slot. Options: Auto,3,4,5,7,9,10,11,12,
14,15 (default:Auto)

nPCI 3 IRQ Assignment

Allows you to assign an IRQ for the third PCI slot. Options: Auto,3,4,5,7,9,10,11,12,14,
15 (default:Auto)

nPME Event Wake Up

Allows user to select the Power Management Event (PME) wake up function which
requires the system to have a +5VSB power supply using a rate of 1A or less.
(default:Enabled)

nModemRingOn/WakeOnLan

To use this feature, an Ethernet card supporting the PCI2.2 or newer standard must be
used. (default:Enabled)

nResume by Alarm

If set to Enabled, the user can set the date and time for automatic system power-on.
(default:Disabled)
Settings:
Date (of Month) Alarm : Everyday, 1~31
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
PnP/PCI Configurations
PCI 1 IRQ Assignment[Auto]
PCI 2 IRQ Assignment[Auto]
PCI 3 IRQ Assignment[Auto]
higf: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: Exit F1: General Help
F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults
Item Help
Menu Level}
Device(s) using this
INT:
IDE Cntrlr
-Bus 0 Dev 31 Func 2
USB 1.1 Host cntrlr
-Bus 0 Dev 29 Func 2