English
21
3.5. Power Management Setup
ΓΈThis is used to control the various power saving features of the PC.

nACPI Suspend Type

Allows user to select the Advanced Configuration and Power Interface(ACPI) as S1/
POS (Power On Suspend) or S3/STR(Suspend To RAM) (default:S1/POS)

nPower LED in S1 state

Allows user to select the system LED status in the S1 (POS - Power On Suspend) state.
Options: Blinking (LED will blink)
Dual/OFF (When selecting this, the LED will turn off for a single-colored LED
or change color for a dual-colored LED)(default:Blinking)

nOff by Power button

Controls whether the PC shuts off immediately after hitting the power button or delaying
a few seconds. (default:Instant-off)
Options: Instant-off (PC shuts off immediately)
Delay 4 Sec. (PC shuts off after a 4sec. delay)

nAC Back Function

Allows user to select system status when power is removed and returned.
Options: Memory (return prior to power removal)
Full-On(return to full system power)
Soft-Off (use of Soft PWR button to power on system)(default:Soft-Off)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Power Management Setup
ACPI Suspend Type[S1(POS)]
Power LED in S1 State[Blinking]
Off by Power button [Instant-Off]
AC Back Function [Soft-Off]
PME Event Wake Up[Enabled]
ModemRingOn/WakeOnLan[Enabled]
Resume by Alarm[Disabled]
xDate (of Month) AlarmEveryday
xTime (hh:mm:ss) Alarm0 : 0 : 0
higf: MoveEnter: Select+/-/PU/PD: ValueF10: SaveESC: Exit F1: General Help
F5: Previous ValuesF6: Fail-Safe DefaultsF7: Optimized Defaults
Item Help
Menu Level}
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
ECP (Extended Capabilities Port)
EPP1.9+ECP (both EPP and ECP)
EPP1.9+SPP (both EPP and SPP)
EPP1.7+ECP (both EPP and ECP)
EPP1.7+SPP (both EPP and SPP) (default:PRINTER)

nECP Mode Use DMA

Allows the user to select the ECP Mode Use DMA
Options: 1, 3, Disabled (default:3)