20
English
nOn-Chip SATA
Options: Disabled (Disable this function.)
Auto (When there is no device connected to IDE1 or IDE 2 channel,
SATA will be configured as IDE mode.)
Manual (Manually configure SATA mode via the "SATA Port0 configure
as" option.) (default:Auto)
nSATA Port0 configure as (Set SATA Mode)
Options: IDE Pri. Master (Set SATA Port 0 to IDE Primary Master.)
IDE Pri. Slave (Set SATA Port 0 to IDE Primary Slave.)
IDE Sec. Master (Set SATA Port 0 to IDE Secondary Master.)
IDE Sec. Slave (Set SATA Port 0 to IDE Secondary Slave.)
SATA Port0 (Set SATA Port 0 to SATA Port0.) (This mode is supported by
only Windows XP or later operating systems)
SATA Port1 (Set SATA Port 0 to SATA Port1.) (This mode is supported by
only Windows XP or later operating systems) (default:SATA Port0)
nSATA Port1 configure as
The item depends on what you set for "SATA Port0 configure as."
nUSB Controller
Allows the user to enable or disable the onboard USB2.0 controller. (default:Enabled)
nUSB 2.0 Controller
Allows the user to enable or disable the onboard USB2.0 (default:Enabled)
nUSB Keyboard Support
Allows user to use a USB-based keyboard (Enable if you are using a USB keyboard,
otherwise Disable) (default:Disabled)
nUSB Mouse Support
Allows user to use a USB-based mouse (Enable if you are using a USB mouse,
otherwise Disable) (default:Disabled)
nAC97 Audio
Allows the user to use the onboard AC97 audio (default:Auto)
nOnboard H/W LAN
Allows the user to enable or disable the onboard LAN (default:Enabled)
nPOWER ON Function
Allows the user to enable or disable the power on function (default:Disabled)
nOnboard Serial Port 1
Allows the user to enable or disable the first onboard serial port
Options: Auto, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled (default:3F8/IRQ4)
nOnboard Parallel Port
Allows the user to enable or disable the onboard parallel port.
Options: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled (default:378/IRQ7)
nParallel Mode
Use this to select the operation mode for the parallel port.
Options: PRINTER
SPP (normal)