Inter-Tel 831.10507 user manual Save These Instructions, CAUTION-The hydrotherapy spa is not

Models: 831.10507

1 24
Download 24 pages 41.55 Kb
Page 5
Image 5
35.CAUTION—The hydrotherapy spa is not

lems, or diabetes to consult their physician before using this product.

34.WARNING—The included warning sign must be posted where all users of the spa can see and read it (see POSTING THE WARNING SIGN on page 13).

35.CAUTION—The hydrotherapy spa is not

designed for in-groundinstallation. Do not install the hydrotherapy spa in-ground.

36.Disconnect the electric power supply before servicing the spa.

37.If you feel pain or dizziness at any time while using the hydrotherapy spa, discontinue use

and contact a physician.

38.Minimum Electrical Ratings:

240 Volt Minimum Supply Conductor

Ampacity: 40 Amps

240 Volt Minimum Breaker/Fuse: 40 Amps

120 Volt Minimum Supply Conductor Ampacity: 15 Amps

120 Volt Minimum Breaker/Fuse: 15 Amps

39.A green terminal or a terminal marked G, GR, Ground, Grounding, or with the symbol

is located inside the supply terminal box or compartment. To reduce the risk of electric shock, this terminal must be connected to the grounding means provided in the electric supply service panel with a continuous cop-

per wire equivalent in size to the circuit con- ductors supplying this equipment.

40.WARNING DECAL PLACEMENT: Locate the

decals shown at right and familiarize yourself with this information.

Continuous exposure of the spa surface to direct sunlight or ultra-violet rays may cause damage to the spa’s surface, will void the warranty, and will result in potentially hazardous surface temperatures.To avoid sun damage, the cover should be in place when the spa is not in use.

WARNING: Read all instructions before using the hydrotherapy spa. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

5

Page 5
Image 5
Inter-Tel 831.10507 Save These Instructions, CAUTION-The hydrotherapy spa is not, Volt Minimum Breaker/Fuse 40 Amps