3Carefully push the card into the connector until it is fully seated.
4Replace the radio card cap.
Before Using Your Printer For The First Time
Remove the protective tab strips underneath the batteries. They are placed there to keep your printer from discharging during shipment.
5Push against the battery lock tab and lift the battery up be- fore pulling on the protective tab strips. These tabs prevent the battery contacts from touching and therefore, no charging occurs.
6If your printer won’t charge after removing the protective tabs, check for and remove any residue in the battery pin area.
Battery contact protective | Center battery |
tab strip (one for each pack) | support posts |
| Battery pack |
Battery lock tabs |
|
(one on each side) |
|
Battery contact
protective tab strips (removed)
PB41 Printer Quick Start Guide | 7 |
