![](/images/backgrounds/264405/264405-149112x1.png)
Access to the FLASH EEPROM Through PCI
When the processor is running, the PCI bus has access to all the elements connected to the local bus, except the FLASH boot memory: the main SDRAM memory (the processor’s SDRAM memory controller must be initialized), the QuadFALC framers, etc. (the processor must have its chip selects programmed). Local space mapping is the same as when accessed by the processor.
It is not possible to have access to the entire FLASH device when the processor is running, because the FLASH device is an
This problem has been neutralized for the other
When the processor is in the reset state, its memory controllers and
Access to the FLASH EEPROM Through PCI
For FLASH
The specific FLASH mode is enabled by one of the PowerSpan interrupt pins
GHILQH7B)/$6+B(1['%FRQWUROV,17DVRXWSXWIRU)/$6+B(1 GHILQH7B+5(6(7['%FRQWUROV,17DVRXWSXWIRU+5(6(7 GHILQH7B65(6(7['%FRQWUROV,17DVRXWSXWIRU65(6(7
YRLG6HW)/$6+0RGHYRLG
^
5HJ:ULWH7B,(55HJ5HDG7B,(5_7B65(6(7_7B+5(6(75HVHW 5HJ:ULWH7B,(55HJ5HDG7B,(5_7B)/$6+B(1WKHQ)/$6+PRGH
`
YRLG5HVHW)/$6+0RGHYRLG
^
5HJ:ULWH7B,657B)/$6+B(15HVHW)/$6+PRGH 5HJ:ULWH7B,657B+5(6(7_7B65(6(7WKHQUXQ
90 | Interphase Corporation |