Interquartz 9859 manual Volume Slider, Trainee / Supervisor Mode

must be set to HS (see installation section). A headset mic adjustment allows most headsets on the Australian market to function correctly when used with the IDea telephone (see installation section)

Incoming call using a HEADSET

1.telephone rings

2.press handsfree / HEADSET

3.commence your HEADSET conversation

Changing from HEADSET to HANDSET During a call

Lift the HANDSET and resume your conversation, the HEADSET function will switch off automatically.

Changing from HANDSET to HEADSET During a call

1.press handsfree/HEADSET

2.replace HANDSET

3.resume your conversation using the HEADSET Outgoing call using a HEADSET

1.press handsfree/HEADSET

2.dial required number on the ALPHA-NUMERIC keypad or press derided MEMORY key.

3.speak us required

or

1.dial required number on the ALPHA-NUMERIC keypad or press desired MEMORY key

2.press handsfree/HEADSET

3.speak as required

Volume Slider

Adjusts the volume of the HEADSET earpiece.

TRAINEE / SUPERVISOR MODE

Allows for the HANDSET and a HEADSET to be used in tandem. This will enable a supervisor to monitor a trainee's progress during a call, or 'take over' call. The following procedure s assume that the trainee is wearing the HEADSET and a call is in progress.

31