Invacare GET-U-UP LIFT Operating the Lift

OPERATING THE LIFT

Get-U-Up™ Lift 14 Part No. 1148115

Operating the Lift

NOTE:Forthisprocedure,refertoFIGURE 3.1onpage15.

Theshifterhandleisusedtoopen/closethelegsofthebaseforstabilitywhenliftinga

patient.

Opening

1. Standattherearoftheliftandgrasptheshifterhandleinone‐handandplacethe

oppositehandonthesteeringhandleofthemastforbalance.RefertoDetails“A” and

“B”.

2. Pushtheshifterhandletoyourrighttoreleasethelockpinfromitsmountinghole.

3. Turnthehandleclockwiseuntilyouareabletosecurethelockpinintotheopposite

mountingholetofullyopenthelegsofthebase.RefertoDetail“C”.

NOTE:ThelockpinMUSTinsertintoitsmountingholeinthesocketassemblytolockthelegsin

thefullopenposition.Theshifterhandlewillbeintheverticalpositionandparallelwiththemast

assembly.

 WARNING

If the shifter handle is NOT vertical, the lock pin is NOT seated in the socket

assembly. DO NOT use the lift until the lock pin is properly seated and locked in

place or injury and/or damage may occur.

Closing

1. Standattherearoftheliftandgrasptheshifterhandleinone‐hand.

2. Placetheoppositehandonthesteeringhandleofthemastforbalance.RefertoDetails

“A” and“B”.

3. Pushtheshifterhandletoyourrighttoreleasethelockpinfromitsmountinghole.

4. Turnthehandlecounter‐clockwiseuntilyouareabletosecurethelockpinintothe

oppositemountingholetoclosethelegsofthebase.RefertoDetail“C”.