Invacare GET-U-UP LIFT manual Troubleshooting, Symptoms Faults Solution

TROUBLESHOOTING

SECTION 7— TROUBLESHOOTING

SYMPTOMS

FAULTS

SOLUTION

Stand up lift feels loose.	Mast/base joint loose.	Tighten the bolt, washer and locknut that secure
	Tie-rods are loose.	the mast to the base.
		Refer to Assembling the Base, Mast and Horn
		Assembly on page 10.
Casters/brakes noisy or stiff.	Fluff or debris in bearings.	Refer to Hydraulic Pump on page 28.
Noisy or dry sound from pivots.	Needs lubrication.	Refer to Hydraulic Pump on page 28.
Lift arms will not lower in upper-	Lift arms require a minimum	Pull down slightly on the lift arms.
most position.	weight load to lower from the
	uppermost position.

NOTE: If problems are not remedied by the suggested means, please contact your dealer or Invacare.

Get-U-Up™Lift 26 Part No. 1148115