SECTION
Set Up
Plug in Power Cord
Plug in power cord to an electrical outlet.
Connect Humidifier (If So Prescribed)
WARNING
DO NOT overfill humidifier.
DO NOT reverse the oxygen input and output connections. Water from the humidifier bottle will travel through the cannula back to the patient.
NOTE: For this procedure, refer to FIGURE 5.1, FIGURE 5.2 on page 17, FIGURE 5.3 on page 18.
1.Remove cap from bottle.
2.Fill humidifier with distilled water to the level indicated by the manufacturer. Replace the humidifier cap and securely tighten.
Humidifier
HumidifierBottle w/o Cap
Bottle with Cap
FIGURE 5.1 Filling the Humidifier
3.Insert a flathead screwdriver in the plate groove on the top edge of the filter access door and gently pry the filter access door off (FIGURE 5.2).
4.Pull up and remove the humidifier bottle adapter (FIGURE 5.2).
Perfecto ™Series | 16 | Part No 1143482 |
2 |
|
|