SECTION
SECTION 7—SEAT AND ARMS
WARNING
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service, turn power off and remove key from ignition.
NOTE: Refer to Label Locations on page 10 for pinch point location.
Removing/Installing the Seat
WARNING
Before use, ensure that the seat is in the locked position. The seat lever MUST be pulled up to the 90° position to allow the seat to drop into the locked position. Oth- erwise, a fall from the scooter could occur causing bodily injury and/or damage to the scooter.
NOTE: For this procedure, refer to FIGURE 7.1.
Removing
1.Fold down seat back.
2.Pull up the seat lock lever.
3.Lift the seat assembly up and away from the seat post.
Installing
1.Lower the seat assembly onto the seat post.
2.Pull the seat lock lever up to allow the seat to drop into the locked position.
3.Lift up on seat assembly to ensure the seat is secure.
Seat
Assembly
Seat Lock
Lever