SECTION 10—BATTERIES

7. Plug the other end of the battery charger cable into 110-volt wall outlet. NOTE: The battery charger light will be YELLOW or RED.

8.Allow the batteries to charge until the charger light turns GREEN.

9.Perform one of the following:

Battery charger light turns GREEN - Unplug the battery charger cable from the scooter and the wall outlet.

Battery charger light flashes GREEN for over 40 minutes - Perform the following steps:

i.Check that the battery charger is correctly connected to the scooter and the wall outlet.

ii.Check that the scooter is turned off.

iii.If steps i and ii do not correct the problem, contact a qualified technician.

10.Unplug the battery charger from the wall outlet.

11.Unplug the battery charger from the scooter.

12.Store the battery charger cable in the storage compartment.

13.Move the battery charger port cap to cover the battery charger port.

14.If removed, install the battery box onto the scooter. Refer to Removing/Installing the Battery Box on page 38.

Battery Charger Indicator Light

Battery Charger Port Cap

Wall Outlet

 

Storage Compartment

Battery Charger

 

Port

 

 

 

Battery Box

 

 

Battery Charger

Cable

FIGURE 10.4 Charging the Batteries

Lynx™L-3 & Lynx L-4

42

Part No. 1143205

Page 42
Image 42
Invacare Lynx L-4 manual Charging the Batteries