Invacare MWD, Arrow FWD, RWD service manual Repositioning the GEARLESS/BRUSHLESS Motor ,14

RWD WHEELCHAIRS PROCEDURE 16

REPOSITIONING THE GEARLESS/BRUSHLESS MOTOR (FIGURE 13,14)

Acceptable mounting positions for the gearless/brushless motor.

NOTE: The motor/gearbox assembly or gearless/brushless motor can be repositioned to lengthen or shorten the wheel-		R
		W
base by 2-inches in 1-inch increments.		D
		W
ARROW AND STORM X	TORQUE
		H
NOTE: These mounting positions apply to the Arrow
	NOTE:These mounting positions apply to the Torque	E
and Storm X with fixed back or recliner and torque	with fixed back.	E
with manual recline option		L
		C
STANDARD POSITION - LENGTHENS the wheel-	STANDARD POSITION - SHORTENSthewheelbaseand	H
		A
base and gives you the most stability and standard	increases maneuverability and distributes additional weight
		I
maneuverability.	on rear wheels.
		R
1-INCH FORWARD - CENTERS the wheelbase and	1-INCH REARWARD - CENTERS the wheelbase and	S
gives you standard stability and maneuverability.	gives you standard stability and maneuverability.

2-INCH FORWARD - SHORTENS the wheelbase and		2-INCH REARWARD - LENGTHENS the wheelbase
increases maneuverability and distributes additional		and gives you the most stability and standard maneu-
weight on rear wheels.		verability.
Standard -		2 - Inch Rearward -
Approximately 65%		Approximately 65%
of weight over		of weight over
rear wheels		rear wheels
1 - Inch Forward -		1 - Inch Rearward -
Approximately 70%		Approximately 70%
of weight over	2 - Inch Forward -	of weight over	Standard -
rear wheels	Approximately 75%	rear wheels
			Approximately 75%
	of weight over
			of weight over
	rear wheels
			rear wheels
	FIGURE 13 - REPOSITIONING THE GEARLESS/BRUSHLESS MOTOR

87