Assembly
FIGURE 1
Step 1:
Remove the Bolts (C4), Washers (C5) and Nuts (C6) from the rear stabilizer. Using this hardware, attach the rear sta- bilizer to the main frame.
FIGURE 2
Step 1:
Remove the Bolts (D7), Washers (D8) and Nuts (D9) from then front stabiliz- er. Using this hardware, attach the front stabilizer to the main frame.
FIGURE 3
Step 1:
Remove the Bolts (B21), Spring Washers (B14) and Washers (B13) from the Central Support Tube. Connect the Lower Cable Assembly (B5) to the Upper Cable Assembly (A15).
Note: Make sure that cables are not pinched.
Step 2:
Connect the Central Support Tube (B) onto the Main Frame (A) using hard- ware previously removed.
Figure 1 |
Figure 2 |
Figure 3 |
6 |
