Assembly
FIGURE 4
Step 1:
Connect the Cables (B5,B6) to the Console cables. Slide the Console onto the Central Support Tube. Secure in place using Screws (E4).
FIGURE 5
Step 1:
Pull Right Connect Tube (A43). Match up bolt holes (see Figure 5a). Secure with Bolt (J1).
Step 2:
Remove the Bolts (G4) from the Handlebars (G). Slide Handlebar onto Central Support Tube. Line up bolt holes (see Figure 5a). Replace hard- ware.
Step 3:
Repeat Assembly steps for Left side.
Figure 5a
Figure 4 |
Figure 5 |
7 |
