Assembly
FIGURE 6
Step 1:
Connect right side Handlebar Joint Covers to handlebars. Secure with Screws (J3).
Step 2:
Repeat for left side Handlebar Joint Cover.
Figure 6 |
B |
FIGURE 7
Step 1:
Remove the Bolts (B7) from the Central Support Tube (B). Remove the Screw (F3) from the handlebar clip. Step 2:
Connect Cables (F5) to Sensor Wires (B6).
Step 3:
Slide the Handlebars (F) into the Central Support Tube. Twist the Handlebars to bring them into the cor- rect position. Secure Handlebars with Bolts (B7) and Screw (F3). Note: Be careful not to pinch the wires.
Figure 7 |
8 |
