Assembly
WARNING!
The uprights are only being held in place by two pop pins. To prevent personal injury or damage to the unit, do not lean on the uprights or use excessive force when assembling.
Pop Pin
WASHER 9*22*2
ALLEN BOLT
M8*15
Pop Pin
Step 2
While standing on the treadmill, hold onto the center cross bar located on the console. Carefully lift up and backwards, lifting the uprights into place.
Do so until you hear the pop pin click. This clicking sound signifies that the left upright is locked into place. This is done to prevent any injury while proceeding to the following steps.
Align the holes on the treadmill to the holes on the uprights. Secure the uprights by using two washers 9*22*2 and two allen bolts M8*15 on each side. Note: Make sure the left upright is all the way back before installing hardware. Do not overtighten bolts.
7
