Assembly
wrench Provided
ALLEN BOLT M8*30 2 PCS
WASHER 9*22*2
ALLEN BOLT M8*20 2 PCS
Step 4
Align the holes on the console to the holes on the uprights. Secure the console onto the uprights using one allen bolt M8*30 and one washer 9*22*2 going through the outside holes of each side, and one allen bolt M8*20 and one washer 9*22*2 going through the holes in the front
of the handlebar area. When tightening the bolts going through the outside, use the wrench provided to tighten the attached nut on the unit. Note: Do not overtighten bolts.
9
