Chapter 18 SNMP
The following table describes the labels in this screen.
Table 49 SNMP Notification
LABEL | DESCRIPTION |
Enable SNMP | Select this to enable the sending of SNMP traps to a remote SNMP management |
Notification | station. |
|
|
Enable | Select this to enable logging of failed authentication attempts. |
Authentication |
|
Notification |
|
|
|
Apply | Click this to save your settings to the switch. |
|
|
18.6 SNMP Trap Station
SNMP traps are used to send out SNMP notifications of urgent or normal events in the system to external management stations. Use the SNMP Trap Station screen to enable the sending of SNMP traps to a remote SNMP management station(s). Click SNMP > Trap Station to view the screen as shown.
Figure 69 SNMP Trap Station
The following table describes the labels in this screen.
Table 50 SNMP Trap Station
LABEL | DESCRIPTION |
Trap Station ID | Select the SNMP trap station you want to edit. |
|
|
Create New | Click this to configure a new SNMP Trap Station. |
Trap Station |
|
|
|
Trap Station ID | This field indicates the trap station number. It is used for identification only. Click on |
| the individual trap station number to edit the trap station settings. |
|
|
Remote IP | This field displays the IP address of the remote SNMP management station. |
Address |
|
|
|
| 115 |
|
|