|
| Chapter 19 |
| Table 59 RMON Alarm: Overview (continued) | |
| LABEL | DESCRIPTION |
| RisingThreshold | This field displays the rising threshold value set up for this alarm. |
|
|
|
| FallingThreshol | This field displays the falling threshold value set up for this alarm. |
| d |
|
| Rising Event | This field indicates the index number of the event entry which corresponds to the |
| Index | time when the alarm threshold was crossed. |
| Falling Event | This field indicates the index number of the event entry which corresponds to the |
| Index | time when the alarm threshold was crossed. |
| Owner | This field displays the name of the creator of this entry. |
|
|
|
| Delete | Click this to remove the selected alarm entry. |
|
|
|
19.5.1 RMON Alarm : Create New Alarm
Use the RMON Alarm : Create New Alarm screen to configure RMON alarms. Click Create new Alarm or click on an existing alarm index entry in the RMON Alarm : Overview screen to view the screen as shown.
Figure 79 RMON Alarm : Create New Alarm
The following table describes the labels in this screen.
Table 60 RMON Alarm : Create New Alarm
LABEL | DESCRIPTION |
RMON MIB | Use this drop down list box to select the MIB table you want to view. Click Apply to |
Table: | refresh the screen to the selected MIB table view. |
Index | This field displays the index number of this alarm entry. |
|
|
Interface | Select the port which is monitored for this alarm. |
|
|
Counter | Select the data which is used to test if this alarm is triggered, the choices are Drop |
| Events, Octets, Packets and so on. |
| 127 |
|
|