
Chapter 20 Dynamic ARP
Figure 85 Viewing ARP Table Entries
The following table describes the labels in this screen.
Table 66 ARP Table
LABEL | DESCRIPTION |
Static | This field is only available when you enable dynamic ARP in the Dynamic ARP > |
binding: ADD | Settings screen. Click ADD to add a static entry to the ARP table. See Section 20.4 |
| |
|
|
Item | This is the ARP table entry number. |
|
|
MAC Address | This is the MAC address of the device connected to the switch with the corresponding |
| IP address below. |
|
|
IP Address | This is the learned IP address of a device connected to a switch port with |
| corresponding MAC address above. |
|
|
VLAN | This is the VLAN number of the device connected to the switch. |
|
|
Type | This shows whether the MAC address is dynamic (learned by the switch) or static |
| (manually entered in the Add Static |
|
|
DELETE | Click this to remove this ARP table entry. |
|
|
20.4 Adding ARP Table Entries
Click ADD in the Dynamic ARP > ARP Entries screen to open the Add Static
"You must first enable dynamic ARP in the Dynamic ARP > Settings screen before you can add static ARP table entries.
Figure 86 Viewing ARP Table Entries
| 135 |
|
|