
Chapter 18 SNMP
Table 50 SNMP Trap Station (continued)
LABEL | DESCRIPTION |
Community | An SNMP community string is a text string that acts as a password. It is used to |
String | authenticate messages that are sent between the management station (the SNMP |
| manager) and the device (the SNMP agent). The community string is included in |
| every packet that is transmitted between the SNMP manager and the SNMP agent. |
| This field displays the community string of this remote trap station. |
|
|
Previous Page/ | Use these navigation links to browse all of your SNMP groups. |
Next Page |
|
|
|
18.6.1 SNMP Trap Station - Create
Click on the Create New Trap Station link in the SNMP Trap Station screen to add an SNMP Trap Station. The screen displays as shown.
Figure 70 SNMP Trap Station - Create
The following table describes the labels in this screen.
Table 51 SNMP Trap Station - Create
LABEL | DESCRIPTION |
Remote IP | Enter the IP address of the remote trap station in dotted decimal notation. |
Address |
|
|
|
Community | Specify the community string used with this remote trap station. |
String |
|
|
|
Create | Click this to add this SNMP user to the switch. |
|
|
Cancel | Click this to go back to the main SNMP Group screen without saving your changes. |
|
|
18.6.2 SNMP Trap Station - Modify
Click on the Trap Station ID number or select a Trap Station ID from the Trap Station ID drop down list box in the SNMP Trap Station screen to modify the settings of an existing trap station.
116 |
| |
| ||
|
|
|