Chapter 11 QoS
11.2 QoS Enhancement
You can configure the switch to prioritize traffic even if the incoming packets are not marked with IEEE 802.1p priority tags or change the existing priority tags based on the criteria you select. The switch allows you to choose one of the following methods for assigning priority to incoming packets on the switch:
Port Based QoS - Assign priority to packets based on the incoming port on the switch. See Section 11.4.1 on page 74.
DSCP Based QoS - Assign priority to packets based on their Differentiated Services Code Points (DSCPs). See Section 11.4.2 on page 75.
ToS Based QoS - Assign priority to packets based on their Type of Service (ToS) tagging. See Section 11.4.5 on page 76.
IP Address Based QoS - Assign priority to packets based on their source IP address. See Section 11.4.6 on page 77.
You can choose one of these ways to alter the way incoming packets are prioritized or you can choose not to use any QoS enhancement setting on the switch.
11.3 Configuring QoS
Use the QoS Setting screen to specify a queuing method and configure queue weights for the switch. Click QoS in the navigation panel to view the following screen.
Figure 36 QoS Setting
72 |
| |
| ||
|
|
|