Jabra 9460 user manual Standard Operation, For MSH Users Only

8.3Standard Operation

During normal operation, the touchscreen shows status information about your headset, displays the current target phone and indicates its status. From here you can answer an incoming call, end the current call, access your base settings, choose a target phone and open an audio link to the current target phone.

2 1

4

3

5

1.Settings icon: touch here to go to the settings menu for your base and headset.

2.Battery indicator: indicates the current charge level of your headset.

3.Current target phone: shows the current target phone and indicates its status (ringing, online, etc.). This is the phone to which you will connect if you tap the headset multifunction button or touch the activate-audio-link icon.

4.Other phones: touch the appropriate icon here to change the current target phone — or press the headset multifunction button when no call is active to cycle through available phones.

5.Activate audio link: touch here to answer an incoming call or activate the audio link to the current target phone — or tap the headset multifunction button when no call is active.

Figure 50: Touchscreen controls for standard operation

For MSH Users Only

If your desk phone is using the MSH electronic hookswitch standard, the idle screen is a little different, as shown below:

Figure 51: The idle screen for a deskphone using MSH

Here, the desk phone is in focus and the headset is docked in its cradle. While the headset is docked, the audio link is closed (inactive).

If you touch the yellow handset icon with the arrows, you toggle the desk phone between on- and off-hook (with MSH, the base and headset cannot determine whether the phone is on- or off-hook).

Jabra PRO 9460, Jabra PRO 9460 Duo, Jabra PRO 9465 Duo and Jabra PRO 9470 User manual

49