Jabra 9460 user manual Connect

CONNECT TO BASE	3. In the (first)	CONNECT TO BASE	4. In the (second)
	CONNECT TO		CONNECT TO
	BASE screen,		BASE screen,
	shown left,		shown left,
	connect the		connect the
	handset as		cable with
	shown.		the blue
			marking to the
			base port, as
			indicated in
			the wizard.

Figure 22: Connect as shown here		Figure 23: Connect as shown here
CONNECT DESK PHONE	5. In the	CONNECT	6. In the (second)
	CONNECT		CONNECT
	DESK PHONE		screen, shown
	screen, shown		left, connect
	left, connect		the control
	to the		cable attached
	handset port.		to the GN1000
			to the base’s
			AUX port.

Figure 24: Connect to the handset port Figure 25: Connect control cable to AUX port on the base

GN1000	7. In the (first)
	GN1000
Mount and configure	screen, shown
GN1000 on desk phone.	left, mount
Follow the instructions in	and configure
GN1000 manual	the GN1000
	on the desk
	phone.

GN1000

Did the GN1000 lift the handset successfully?

8.In the (second)

GN1000 screen, shown left, you must determine whether the desk phone went off-hook. If so, touch Yes.

Yes No

Figure 26: Mount and configure on the desk phone Figure 27: Touch Yes if the handset was lifted

If the handset was not lifted, touch No. In this case, you can choose to Retry or Cancel. If you choose to retry, the touchscreen takes you back to a point in this flow just after step1 (where Jabra GN1000 has been selected). If you choose to cancel, the setup is aborted and the touchscreen takes you to the start of the cabling procedure for configuration without EHS or GN1000. You can return to the GN1000 setup later.

Jabra PRO 9460, Jabra PRO 9460 Duo, Jabra PRO 9465 Duo and Jabra PRO 9470 User manual

24